Ana sayfa ÜrünlerOtopark Bariyer Kapısı

Düşük Gürültü Otomatik Kapanma Park Bariyeri Kapısı DC Yedek Akü

Wonsun is a very reliable company, fast shipment and good quality, the most important is competitive prices.

—— Ali Alabadi

I really recommend, a great team and good quality. Very good. I will buy again.

—— Oliver

Ben sohbet şimdi

Düşük Gürültü Otomatik Kapanma Park Bariyeri Kapısı DC Yedek Akü

Çin Düşük Gürültü Otomatik Kapanma Park Bariyeri Kapısı DC Yedek Akü Tedarikçi
Düşük Gürültü Otomatik Kapanma Park Bariyeri Kapısı DC Yedek Akü Tedarikçi Düşük Gürültü Otomatik Kapanma Park Bariyeri Kapısı DC Yedek Akü Tedarikçi

Büyük resim :  Düşük Gürültü Otomatik Kapanma Park Bariyeri Kapısı DC Yedek Akü

Ürün ayrıntıları:

Place of Origin: China
Marka adı: WONSUN
Sertifika: CE, ISO, SGS
Model Number: DZ-138

Ödeme & teslimat koşulları:

Min sipariş miktarı: 1ADET
Fiyat: USD300~400per unit
Packaging Details: Packed in bubble wrap firstly, and then reinforced with carton for outer packing.
Teslim süresi: ödemenizi aldıktan sonra 3-7 iş günü
Ödeme koşulları: T / T, Western Union, Para Gram, Alibaba Ticaret Güvencesi, Paypal vb,
Yetenek temini: 1000 setleri/ay
Contact Now
Detaylı ürün tanımı
Adı: Otopark için Otomatik Kapanma Park Bariyer Kapısı DC Yedek Pil Motor anma gücü: 50W, Maksimum 100W
Gerilim: AC90v ~ AC264V, DC24V Uzaktan kumanda mesafe: <100m
MTBF: > 5000.000 kez Garanti: 2 Yıl

Auto Closing Parking Barrier Gate DC Backup Battery For Parking Lot

  

 

Quick Introduction

 

The DZ-138 servo barrier gate series, which researched developed and manufactured by our company, adopts international advanced technology, mechanical and electrical integrated design. Planetary gear drive, high torque, un-blocked, oil tight, no noise, automatically unlocked when the power is off, with 10 million operation times. 

 

Features

 

1. The gate automatically open when the power is off, no clutch design, no need human intervention. When the power is on, the gate automatically reset, and the gate returns to being closed, truly unattended, fire safety standards. If there is special need, manual operation is required when the power if off, the operating arm can open and close manually. Can also set up the control board DIP switch, which will ensure the system can be used at any time

2. The use of Single Compression Balance Spring device, good regulation, no noise, indefatigable, not easily broken, safe and reliable.

3. A variety of input and output modes can be selected, normally open normally closed are optional.

4. Arm opening angle can be adjusted from 60 to 90 degrees, 10 degrees resolution, suitable for eaves prominent place to install.

5. Speed can be adjusted.

 

 

Controller Data

 

Voltage(±10%) 100-240 volt 100-240 volt
Frequency(Hz) 50-60 50-60
Max Power Consumption(watt) 8 8
Fuse F5AH F5AH
Control Voltage 24V DC/max.3000mA 24V DC/max.3000mA
Input-end Number 8 8
Open Collector Output Number 2 2
Zero Level Reversal Relay Number 3 3
Operating Temperature Range℃ -45℃~+85℃ -45℃~+85℃
Protection System(IP) 20 20
Weight(gram) 450gram 450gram
Dimension mm(L-W-H) 158*126*55

 

 

Parameter of barrier gate

 

DZ-138 barrier gate V06T V09T
Max Boom Length and Diameter 2500mm, Ф75mm 3000mm, Ф75mm
Open/Close Time 0.6sec 0.9sec,2.5sec,4.5sec
Power Supply 24/100/240VAC,50/60Hz 24/100/240VAC,50/60Hz
Power Consumption max.150W 100w
Machine Case Varnished 2.0mm steel plate Varnished 2.0mm steel plate
Machine Case Size(W*D*H) 342*312*959mm 342*312*959mm
Net Weight 43kg 42.6kg
Operating Temperature Range℃ -45℃~+85℃ -45℃~+85℃
Driving Method Servo motor Servo motor
Protection System(IP) 54 54

 

Program 1

 

The barrier gate can be controlled by two-key push button and an impulse will trigger the operation relay.

Connecting GND and COM, 24V with UP is for machine opening, 24V with Down is for machine closing. Other accessories interface input available, like IR sensor and loop detector signal.

 

Program 2

 

The barrier gate can be controlled by remote controller or GSM gate opener.

 

Connecting the antenna receiver GND to COM on the board, Remote-up is for opening and Remote-down is for closing.

 

If the remote control receiver is non-electric relay signal, connecting GND and COM first, the 24V connecting with Remote-up is for opening and 24V connecting with Remote-down is for closing.

 

Program 3

 

The barrier gate can be controlled by gate photocell(IR sensor) or loop detector for automatic opening and closing. There are other signal input as emergency stop and alarm signal. The connection is as program 1 mentioned.

 

Program 4

 

Boom-drop signal input: when the boom is crashed by passing vehicle, the barrier gate will stop to run with a warning output.

 

 

 

Operation Time and Boom Length Configuration Parameter

 

Boom Type(meter) Operation Time(seconds) Boom Height(meter)
Fast speed boom≤2.5 0.6 0.83
Fast speed boom≤3 0.9 0.83
Common straight boom≤4.5 2.5 0.83
Common straight boom≤6 4.5 0.83
80*45mm 90°folding boom≤3 1 0.83
80*45mm 90°folding boom≤3.5 2.5 0.83
80*45mm 90°folding boom≤5 5 0.83
80*45mm 180°folding boom≤3 1 0.83
80*45mm 180°folding boom≤4 2.5 0.83
80*45mm 180°folding boom≤5 4.5 0.83
100*45mm 2 fence boom≤3.5 2.5 0.83m, small vertical boom is 0.8m, landing boom is 0.9m
100*45mm 2 fence boom≤5 6 0.83m, small vertical boom is 0.8m, landing boom is 0.9m
100*45mm 3 fence boom≤3 3 0.83m, small vertical boom is 1.5m, landing boom is 1.6m
100*45mm 3 fence boom≤4 6 0.83m, small vertical boom is 1.5m, landing boom is 1.6m
 
Düşük Gürültü Otomatik Kapanma Park Bariyeri Kapısı DC Yedek Akü

 

 

Why choose us:

 

1. Our Factory has 8 years OEM/ODM experiences in the line of barrier gate.
2. Prompt delivery time. Usually we keep stock of standard model which ensure the prompt delivery.
3. We accept OEM/ODM orders to meet the requirements of clients.
4. Trial order is acceptable. Clients can buy sample and test it before bulk order.

5. Online technical support makes it carefree to be our business partner.

6. A variety of transportation for your choice. Sea shipment, air cargo or express, depends on your demand.

7. Factory can be visited on working days. Clients are warmly welcome to visit our factory.

 
 
Contact us for pricelist and catalog:
Sarah lee
Email:sarah@wonsunbarrier.com
Skype:lee72323
Whatsapp:+86 13751381783

İletişim bilgileri
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd

İlgili kişi: Sarah Lee

Tel: +8613751381783

Sorgunuzu doğrudan bize gönderin (0 / 3000)