Ana sayfa ÜrünlerBariyer Kapısı Operatörü

Parking Lot Management Systems access barriers Remote Control Receiver 220V For Gates

Wonsun is a very reliable company, fast shipment and good quality, the most important is competitive prices.

—— Ali Alabadi

I really recommend, a great team and good quality. Very good. I will buy again.

—— Oliver

Ben sohbet şimdi

Parking Lot Management Systems access barriers Remote Control Receiver 220V For Gates

Çin Parking Lot Management Systems access barriers Remote Control Receiver 220V For Gates Tedarikçi

Büyük resim :  Parking Lot Management Systems access barriers Remote Control Receiver 220V For Gates

Ürün ayrıntıları:

Place of Origin: China
Marka adı: WONSUN
Sertifika: CE, ISO, SGS
Model Number: WSTP-129

Ödeme & teslimat koşulları:

Min sipariş miktarı: 1ADET
Fiyat: negotiation
Ambalaj bilgileri: Öncelikle bubble wrap paketlenmiş ve daha sonra dış ambalaj için karton ile güçlendirilmiştir.
Teslim süresi: ödemenizi aldıktan sonra 3-7 iş günü
Ödeme koşulları: T / T, Western Union, Para Gram, Alibaba Ticaret Güvencesi, Paypal vb,
Yetenek temini: 1000 setleri/ay
Contact Now
Detaylı ürün tanımı
OEM:: Support Certificate: ce
Arm type: straight, folding, fencing Color: White, Grey, Customized
Boom Length: Max 6 meters Material:: 2mm Cold Roll Plate Or Galvanized Plate

 

Parking Lot Management Systems access barriers Remote Control Receiver 220V For Gates
 
 
Functions and Features:
 
1) Manual release
2) Machine core with compression spring, effectively avoids the accidents caused by spring breaking
3) Die-casting aluminum alloy motor, precision and good at thermal radiating
4) Motor cooling fan, solving the problem of heat-protection
5) Double safety limit switches (photocell electrical limit switch/motor memory sensor)
6) Reversing on obstacle
7) Auto-closing
8) Support the INFRARER PHTOCELL for anti-bumping function (optional)
9) Support the external and internal VEHICLE LOOP DETECTOR (optional)
10) Traffic light interface
11) Wire control (switch signal)/ Remote control (418MHZ)
12) RS485 communication module (optional)

 
 
Model WSTP-129
Size 320*280*935 mm
Voltage AC 220V/110V±10%, 50/60HZ
Rated Power 120W
Operation time 0.6s, 1s, 1.8s, 3s,4s,6s. Customized
Working Temperature -40℃~+75℃
Material

Galvanized plate or Cold roll plate, 2.0mm thickness sheet
3 years without rust, shedding and fading

Spring And Bearing Heat Treatment: more durable, more than 5 million times through operation testing
Remote Control Distance Usually more than 30 meters, if there is less obstacles, even 50 meters or more
Packing Size 1020*375*467mm , with seven layers carton case

inside with air bubble film for protection

Delivery By Sea: big order(more than 100 sets), Cheap, suggested

By Air: small order(1-15 sets), quick and cheap, suggested

 
 
 
Parking list:
 

Items quantity items quantity
Paint-coated case 1 motor 1
Transmission 1 limit switch 1
Barrier arm 1 capacitor 1
Spring 1 circuit board 1
Remote control device 2 console control device 1
Installation kit 1    

 
 

FAQ:
 

Communication with customers
1. Motor works but there is no reaction on the arm.
a. Please check whether the clutch device is locked or not.
2. There is too much vibrant when the boom is rising or falling.
a. Please check whether the shock absorption rubber is broken or not, if yes, change a new one.
b. Please check whether the balance spring is overused and distorted. If yes, change a new one.
b. Please check whether the balance spring is overused and distorted.If yes, change a new one, or spin
bottom adjust nut.
3. The boom could not rise up or fall down to the end.
a. When change a long boom to a short one, please readjust it.
b. The sensor does not plug well, please chek it.
c. The " Speed adjust switch" is wrong adjust, please readjust it.
4. The distance of the remote control decreases.
a. Check whether the charge capacity of the remote controller is enough or not.
5. There is no reaction when pressing the remote controller buttons.
a, Please check whether the power is supplied to the barrier gate or not.
b. Please check whether the fuse is burnt out or not.
c. Please check whether the code both in the remote controller and the control board are accordant or not.
6 There is no reaction on the motor when the user changes a control board.
a. Please check the capacitance is correctly fixed or not.
b. Please check the sensor is right inserted or not.

İletişim bilgileri
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd

İlgili kişi: Keira

Sorgunuzu doğrudan bize gönderin (0 / 3000)